Everyone can think of the deafening roar of the engine whenever they mention the F1 racing car, but now the environmental laws are becoming more and more stringent, from the original deafening V8 engine, to the current 1.6T V6 engine, to the Formula E electric equation, not just in the race circle Inside, we in the usual civilian market, the large displacement of the engine, its stock is also less and less, more and more car companies are also focused on the small displacement vehicle quantification turbocharged engine body. For example, many of the classic models on the market today have been reduced from the original v8v6 engine to a 2.0T four-cylinder engine and a 1.5T three-cylinder engine.
Although the displacement of the car is small, the volume is also small, but it has no loss of power, and more energy-saving and environmental protection, so its tax is also reduced a lot, the original need for six cylinders and eight cylinders to provide a full power, after the production of new technology, four cylinders or even a single cylinder engine. It can be done very well, so its power crushing level is also very high, but it also brings us new problems. So even if the engine needs to run at a higher load and at a higher intensity, some of the chicken oil in the engine is more likely to accelerate oxidation, at this time one of its internal structure is also easy to degenerate, and the internal abnormal wear and tear and sludge accumulation. Therefore, we usually maintain vehicle maintenance is also very necessary.
You need to do this:
1. To select high-quality oil, turbocharged engine oil must be selective high-temperature resistance and better oxidation resistance of high-quality oil, these oil replacement cycle to be relatively shorter, in order to ensure the turbocharged lubrication and cooling effect.
2. Don't drive abruptly. Accelerate suddenly when the car starts. For example, in winter or some cold areas, the engine should idle for a while after starting, at least within three minutes. If you can't wait, then don't rush to refuel after the car starts. Slow down the fuel so that the engine can be fully lubricated to the turbocharged bearing.
3. The engine can not be extinguished immediately. If it is extinguished immediately after the engine is running at high speed, the amount of oil supplied to the turbocharged bearing will decrease. At this time, the turbocharger's function will be fatally damaged due to lack of lubrication and cooling at high operating temperatures. So we have to install a turbocharger to delay the shutdown, so that we can improve the use time of my turbocharger.
4. clean the engine compartment. On the surface of the engine circuit, plastic rubber battery joints expose other metal parts, which let the heat of the engine quickly dissipate, but also can protect some of the engine cabin circuit, prevent rubber aging cracking, metal rust stained with some dirt, in cleaning the engine cabin, like the 4S shop. The sample is coated with a protective agent so that the engine compartment is not easily covered with dust and remains durable and fresh.
5., carbon deposition should be regularly cleaned. Do not use some inferior lubricating oil, or to the regular repair shop for maintenance, but a long time, then it will be serious carbon damage to the engine.
